SRS Module Reset

If you own a vehicle with its airbag light on, chances are something is wrong with one or more of your SRS components such as the airbags, seat belt retractors, tensioners or buckles, clockspring or crash sensors. The SRS module communicates with all of these components via a wire to determine a fault. When a car gets into a crash, the SRS module needs to be reset. Of course you will need to repair or replace any and all SRS components. first. The first recommended thing to do is use an airbag scanner to read all the faults/codes stored in the module. Follow them. If your airbags deployed, you will first need to replace the airbags. If you are getting a code for your crash sensors, you will need to replace them. If you are getting a code for your seat belt pretensioners, you will need to repair them at SafetyRestore.com. Lastly, once your SRS components have been replaced or repaired, you will need to have your SRS module reset. This reset erases crash data and hard codes found in your SRS airbag module, reprogramming it to factory condition and making it like new! Your SRS module is the computer or the brains for your entire SRS system. You cannot pass inspection without it being good. So if you need your SRS module reset, visit the Safety Restore online store to find the SRS Module Reset. The SRS module reset service is only $50 and is very fast and affordable. Once you place your SRS module reset order online, you will need to remove it form your vehicle and send it in to: SAFETY RESTORE 45 Meadow St. Westfield, MA 01085 for the 24 hour turnaround reset. If you have any questions, you can call us at (855) 552-7233 M-F 9-5 EST for all of your SRS module reset needs. There is no more need to buy a new SRS module with this quick and affordable reset service. So send your SRS module for a reset and start saving! If you work with salvage cars and rebuildables, you will save thousands.